Industrial Ex d IIC Certified, Mining M1 Certified available for all variants
SIL1 certification available for all variants
All sensors carry a 5-year warranty
Measures methane from 0 to 100% volume with a resolution of 0.01 % for 0-5%
methane and 0.1% for 5-100% volume
Multiple gas ranges enable the accurate detection of 0-100% vol. methane, 0-2% vol.
propane and 0-100% vol. carbon dioxide with one sensor
Measures carbon dioxide from 0 to 5% volume with a resolution of 0.01 % and 0.1% for
5-100% volume
Configuration available specifically for biogas measurement
Offers reduced response times when compared with earlier versions
User configurable using USB powered Premier Configuration Unit
Output can be scaled in % volume or % LEL
Internal Flash memory allowing sensor firmware updates via configuration unit
Enhanced EMC protection
Infrared NDIR Sensor
Overview
Our Dual-Gas Methane (CH4) / Carbon Dioxide (CO2) sensors are revolutionary devices for the simultaneous measurement of Methane and
Carbon Dioxide in a single sensor package. They acheive this whilst only consuming the power of a single infrared sensor.
The sensors also have the additional benefit of a pre-characterised 0-2% Propane measurement range included as standard.
The sensors provide accurate measurement of gas levels using infrared gas sensing techniques. Various versions are available with
combinations of ranges up to 100% volume Methane and 5% volume Carbon Dioxide. They consume the power of a single infrared sensor
and therefore provide prolonged battery life when used within portable gas detectors.
The Hydrocarbon channel provides simultaneous readings for both High Resolution Methane and Propane.
Hydrocarbon Channel Resolution - 0.01% for range 0 to 10% Vol. and 0.1% for range 10% to 100% Vol. (CH4)
The sensors are part of the 'Platinum' Series and are available in Industrial Ex d IIC Certified, Mining M1 Certified and Non-Certified versions. They are also UL approved.
Low power and EN50271 / SIL1 certified software versions are also available in all combinations.
The 'Premier' Gas Sensor Configuration unit is for use with 'Platinum' Series sensors. It enables customisation of user definable parameters, data logging and calibration.