Loop-powered, industrial moisture transmitter, 20 to -110°Cdp.
Self-contained hygrometer for high purity gases, range down to 1ppbV.
Measures moisture in non-polar, flammable liquids and petrochemicals.
Single or dual channel moisture measurement in explosion-proof enclosure.
Intrinsically safe, multi-channel, H2 ready and easy to operate.
Laser-based, precise hygrometer for varying gas compositions. H2 ready.
Low maintenance, quartz crystal based analyzer with built-in self-verification.
Chilled mirror-based, self-contained and fully automatic on-line HCDP analyzer.
Easy to use, high-speed dew-point measurement down to -60 °C dp.
Rugged and compact with integral sample conditioning, down to -60°Cdp.
Self-contained, easy to operate, portable device for on-site validations. 5 to 95% RH.
Transportable and simple to use and maintain, with excellent chamber uniformity.
Slide-out design with welded and VCR fittings for semiconductor installations.
Cost effective, 2 beds purification design with auto diagnostics function.
Rackmount, low dead-volume and low sample consumption system.
Maintenance-free design with self diagnosis. PPM and % ranges.
Plasma Emission Detector based, low ppb nitrogen range analyzer in compact rack design.
Flexible and easy generation of gas mixtures from multiple gas libraries.
Compact design with remote and local stream selection and ultra low maintenance.
Fast, easy operation analyzer with multiple installation options.
Small footprint, robust, multi-sensor-based O2 transmitter.
Compact design, with fast responding oxygen sensor selection.
One of the smallest SIL 2-rated oxygen transmitters, 0-25% oxygen monitor.
Housed in rugged casing for hazardous areas % O2 monitoring. No hot works permit needed.
Plug and play, expandable GC design with low ppb capability.
Measures, records and displays CO2, humidity and temperature.
Compact design, long life monitor with audio and visual alarm.
Cost effective and convenient oxygen level monitors in 0-100% range.
Fast response, stable with long service life and ppm to percent oxygen range.
Large Selection of sensor models and types.
Robust, electrochemical oxygen sensors for selected diving OEMs.
Fast response, ppm measurement in AM build chamber. Integral sample pump.
Cost-effective, two wire, loop-powered oxygen transmitter.
Direct installation in process gas stream with variety of process connections.
Fast, temperature compensated gas sensors UL, IECEx and ATEX certified.
Network compatible with automatic zero point compensation.
Interchangeable Sensor for Relative Humidity and Temperature
Traceable Humidity Standards and Calibration devices
User-configurable ranges. Safe or hazardous area configurations.
Long-life, non-depleting miniature configuration with different probe lengths.
Long-life, non-depleting screw- in configuration with different probe lengths.
Long-life, pinned flange mount configuration for high temperature installations.
Long-life, wired flange mount configuration for high temperature installations.
Long-life pinned configuration suitable for PCB installations.
Electronics needed to control the zirconium oxide sensors.
Enhanced electronics with pressure compensation for control of the ZrO2 sensors.
Small footprint, packaged configuration for oxygen closed systems.
Complete OEM Kit consisting of screw in O2 sensor and OXY-LC board
Long-Life, Low Power, Fast Response Compensated Oxygen Measurements 0-300mbar ppO2 (0-25% O2) Virtually no cross sensitivity to other gases
Extra-sealing for unidirectional O2 measurement.
Flow-through housing for clean O2 sampling outside process.
Cloud based modular, flexible and scalable real-time monitoring.
Humidity, Dew-Point and Pressure Data Loggers
All-in-one logger, individually configurable.
Calibration in ranges of -5…60 ° and 2…99 %RH
An all in one unit to measure trace impurities, including moisture, to ppb levels in hydrogen.
Precise handheld devices, with fixed and exchangeable HC2A probes.
Ultra stable, accurate and versatile Temperature and Humidity probe
Extension cables
Fixed sensors, designed for outdoor meteorological applications.
For interchangeable HC2A-S3
Easy to install, suitable for different probe diameters
Two channel, wall and duct mount installations
Choice of sensor technologies, ranges 0 to 96% O2.
Rugged Exd enclosure for hydrogen and flammable gases monitoring.
Up to four parameters measured with programmable alarm outputs.
Easy to install, galvanic sensor oxygen monitor with % and ppm range.
Autocalibration, data logging, and multiple configurable outputs.
ATEX-approved, O2 transmitter with 4-20mA analogue output.
Flexible installation. Easy to maintain ppm and % oxygen measurement.
High accuracy, easy to use O2 monitor with low maintecance costs.
Robust design with a selection of probe materials up to 1,400 °C
Compact, lightweight and easy to install analyzer.
Easy to use and maintain solution with four measurement ranges.
Process trace oxygen analyzer.
Compact, lightweight and easy to install analyzer.
Easy to operate with automatic correction for environmental conditions
Cost effective, single-gas sensors UL, IECEx and ATEX certified.
Fast, temperature compensated gas sensors with global approvals.
Precise humidity measurement from -90 °Cdp to +20 °Cdp.
Precise, fast and low-cost maintenance instrument for industrial gas.
Simple to operate, with easy automated set point programming.
High-accuracy humidity measurement from -60 °Cdp at elevated pressure levels.
Accurate, drift-free measurement in wide range, -40 to +120°Cdp.
Remote, high-precision sensor for direct sample insertion.
Complete customizable dew-point calibration solution.
Loop powered, rugged and fast responding moisture meter from Michell.
Rugged, fast responding OEM industrial dryer solution from Michell.
Compact and rugged design for easy outdoor process installations.
Rugged process enclosure with optional moisture display.
Complete hygrometer solution for quick and easy measurement.
Modular system design for repeatable moisture measurements.
High pressure process gas sampling with flexible filtration options.
Complete HCDP analyzer solution incl. on-board gas sample handling.
Complete range of moisture generators for dew-point measurement.
Wide range of humidity generation.
Stable, self-contained, low maintenance drying solutions.
Self-contained hygrometer with built-in sampling system.
Complete on-line dew-point solution with pressure compensation.
Integrated instrument and sampling system.
Industrial moisture transmitter with 3/4 UNF process port.
Self-contained service tool for Easidew and Pura dew-point transmitters
2-wire loop-powered connection, 3 types of process connections.
Low-cost gas sampling with filtration and flow control
Loop powered 4-20mA indicator in robust GRP housing.
Rail-approved, fast response dew-point meter.
Range from -100°Cdp to +20°Cdp with 0.1°C accuracy
Combined analysing solution for quality measurement in natural gas.
Combines up to 3 detectors in one GC.
All-in-one highly selective GC detector.
For Process and Laboratory Analysis
Compact analyzing solution for multiple trace gases.
High-spec FID-based, easy to use gas analyzer.
Large selection of gas traps preventing column degradation
Ultra stable, accurate and versatile probe for Termperatures -50…100°C
Selection of various enclosure types and sizes.
Negative temp. coefficient (NTC), temp-range -35…80°C.
Various probes for harsh environment and temperatures -100…200°C
Fixed ambient oxygen deficiency monitors with alarms.
Various handheld probes for high temperature and small spaces
Accurate and stable oxygen measurements to low parts per trillion.
For complete dew-point measurement range of -60 to +60 °C dew point
Ultra-low power, miniature CO2 sensor enables users to manage power consumption.
Portable and fixed modules for bezel or internal mount.
Rugged, easy to use, long battery life. Ranges from ppm to 100% O2.
Simple to operate, multi-range, wall-mount O2 analysis.
Two channel, data logging and timestamp function.
Measurement range 0 to 1 AW, UART interface.
NEW High-end laboratory AW analyzer.
High temperature stability, interchangeable probes.
AW Quick for fast results, data logging, alarm.
Selection of sample holders and containers for AW measurement.
Simple, cost-efficient humidity measurement solution.
Accurate transmitter with fixed probe
Selection of extension and service cables.
FDA- and GAMP-compatible differential pressure device
Rugged industrial housing, 3 control relays, magnetic pen operation.
Exchangeable probes, digital outputs, multiple installation types.
Highly accurate and reliable probes.
Single point, stainless steel and glass construction.
Only for high volume OEM requests.
High quality, industrial grade level sensors.
Detection of hydrocarbon, hydrogen or toxic gases
Small, cost-optimized level sensors in chemically resistant housings.
Rugged, stainless steel packaged level sensor.
Temperature compensated, IR sensor-based, no routine maintenance needed.
ATEX Ex-d Certified Stainless Steel Housing
Selection of probe filters and filter carriers.
Compatible with FDA 21 CFR Part 11 and GxP.
Cost effective, single-gas sensors UL, IECEx and ATEX certified.
Fitted with Sensors for Flammable or Toxic Gases
Mains or DC powered stand-alone gas detectors.
Low-power, solid state electronics.
Output signal two wire 4-20mA, Supply voltage 8-24VDC
Low-power, fits compact instruments. Integrates with wireless IoT.
Robust stainless steel housing, larger mounting threads.
Easy to use, versatile handheld based on maintenance free O2 sensors.
Measures gas mixes in operating and maintaining hydrogen cooled generators.
Compact, rugged IP66 enclosure for hazardous areas, minimal maintenance.
Sample handling included, maintenance-free sensors.
High-accuracy instruments for controlling trace oxygen or gas purity.
The RMS temperature portfolio covers a wide range of applications
Data logger with two integrated analog-to-digital converters
Uses the chilled mirror principle for both hydrocarbon and water dew-point measurements
Portable and fixed modules for bezel or internal mount.
The combustion oxygen analyzer from PST is a compact zirconium dioxide analyzer that measures percent level (0 to 25% oxygen) in all combustion processes.
Heavy Duty Transmitter
Portable and fixed modules for bezel or internal mount.
Small footprint, packaged configuration for oxygen closed systems.
The RMS-HCD-S digital probe is characterized by its high performance.
Measures, records and displays CO2, humidity and temperature.
MODBUS Converter / Amplifier
Service cable for Rotronic Transmitter
Compatible with FDA 21 CFR Part 11 and GxP.
Thanks to its compact size, high accuracy and various selection possibilities, the transmitter can be adapted to customer wishes and used practically everywhere.
Heavy Duty Transmitter
High accuracy, easy to use O2 monitor with low maintecance costs.
Various probes for harsh environment and temperatures -100…200°C
Accurate transmitter with fixed probe
Various probes for harsh environment and temperatures -100…200°C
testproduct
Various probes for harsh environment and temperatures -100…200°C
Accurate transmitter with fixed probe
The flexible dataprotection component of the Rotronic Monitoring System RMS
Probe for applications in explosive atmospheres
Probes for applications in explosive atmospheres
Probes for applications in explosive atmospheres
Probes for applications in explosive atmospheres
The flexible dataprotection component of the Rotronic Monitoring System RMS
The Gateway is the interface between the wireless data logger and the server software.
One of the smallest SIL 2-rated oxygen transmitters, 0-25 % oxygen monitor.
Small footprint, robust, multi-sensor-based O2 transmitter.
Versatile Dew-Point hygrometer with pressure compensation
Easy to use, high-speed dew-point measurement down to -60 °C dp.
LDCryo stand-alone system designed to generate 99.9999999% Helium purity carrier gas (Argon removal included) for use in process GCs, such as the MultiDetek3.
Various handheld probes for high temperature and small spaces
Small footprint, packaged configuration for oxygen closed systems.
Functionality of two GCs in one plus trace moisture and O2
High quality, industrial grade level sensors with independant load switching
Ultra-high purity switchover system designed to optimise performance of trace impurities analyzers.
Stand alone pressure monitoring system designed to monitor up to 2 gas sources.
A series of pressure reducing regulators designed for use with UHP and specialty gases on manufacturing lines.
Designed for ultra high purity applications where sub ppb detection and trace analysis are required.
Pneumatic diaphragm shutoff valves for ultra high purity applications where sub ppb detection and trace analysis are required.
High capacity and purity traps for ultra high purity applications
Probes for applications in explosive atmospheres
High-precision low dew-point reference hygrometer for humidity calibration and standards laboratories.
High Accuracy Humidity and Temperature Measurement
Ultra stable, accurate and versatile probe for Temperatures -50…80 °C
The wireless mini data logger is the low-cost data logger in the Rotronic Monitoring System. Its small housing and wireless interface make it a really flexible data logger.
The Rotronic differential pressure probes are ideal for clean rooms, operating theaters and applications where even minor differences in pressure can have a big effect.
High-precision measurement and long-term stability
Analog probe with NDIR technology for measurement of carbon dioxide (CO2) for incubators
Data logger with two integrated analog-to-digital converters to which two sensors can be connected for high-precision analog measurement.
The wireless mini data logger is the low-cost data logger in the ROTRONIC monitoring system. Its small housing and wireless interface make it a really flexible data logger.
Integrate existing devices and networks into the RMS
The digital input module stores all measured data on an event basis and sends it to the database via Ethernet.
The digital output module serves to display information, issue alarms and control events.
The LAN display is a freely configurable display.
Pharmacy laws and control of therapeutic products require controlled storage of medicines.
The development of legionella in drinking water lines can be prevented by avoiding stagnations, a temperature range of 25 °C to 55 °C and biofilms on the insides of the pipes.
Climate and light are both factors that influence the preservation of museum exhibits and archive material as they cause damage by accelerating chemical and biological degradation processes.
The wireless mini data logger is the low-cost data logger in the ROTRONIC monitoring system. Its small housing and wireless interface make it a really flexible data logger.
The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature. The T10 temperature sensors are compatible with the RMS-MLOG-T10-868/915 data loggers.
The RMS-LOG-T30 is a data logger with two integrated analog-to-digital converters, to which two PT100 sensors can be connected for high-precision temperature measurement.
The RMS-LOG-T30 is a data logger with two integrated analog-to-digital converters, to which two PT100 sensors can be connected for high-precision temperature measurement.
Cost effective and convenient oxygen level monitors in 0-100% range.
Cost effective and convenient oxygen level monitors in 0-100% range.
Cost effective and convenient oxygen level monitors in 0-100% range.
Cost effective and convenient oxygen level monitors in 0-100% range.
Cost effective and convenient oxygen level monitors in 0-100% range.
For Oxygen Measurement in Welding and Scuba Diving
Cost effective and convenient oxygen level monitors in 0-100% range.
Exchangeable probes for Humidity and Temperature Measurement
Ultra-stable, accurate and versatile probe for temperatures from -50...100°C
Ultra stable, accurate and versatile probe for Termperatures -50…100°C
Ultra stable, accurate and versatile probe for Termperatures -50…100°C
Suitable for high temperatures and demanding industrial environments. It measures humidity and temperature and calculates the dew/frost point.
suitable for measurement in dust-free bulk materials, bricks, concrete, etc.
Suitable for measurement in bulk materials, bricks, concrete, etc.
Easy-to-install protective shield with integrated fan
The RMS-TCD-S-001 is a completely digital designed probe for the Rotronic Monitoring System RMS. It measures temperature.
