ProcessSensing Launches Next-Generation Trace Moisture and Oxygen Analyzer - LDetek LDmox

08.02.2023

ProcessSensing Launches Next-Generation Trace Moisture and Oxygen Analyzer - LDetek LDmox

Trace Moisture and Oxygen Analyzer - LDetek LDmox

The new LDmox from LDetek is the most compact solution for measuring trace moisture and oxygen levels in gas. This next-generation analyzer uses a combination of our advanced proven technologies - the Quartz Crystal sensor from Michell Instruments and the Senz-Tx (electrochemical/zirconia) series from NTRON. By combining these two technologies, LDmox is the perfect solution for your application.

LDmox provides accurate and reliable results for any application, with a response time of fewer than 10 seconds for trace oxygen measurement and less than 5 minutes for trace moisture.

Other features include but are not limited to the list below:


  • Operating Temperature Range: 5-45 °C
  • Sample Gas Temperature: 0-100 °C
  • Operating Sample Pressure Range: 5-30 psig (for lower sample pressure requirement, an additional high-purity pump is used)
  • Sample Flow Requirement 100ml/min per sensor installed
  • Pressure Range 5-30 psig (for lower sample pressure requirement, an additional high-purity pump is used)
  • Outlet Pressure Atmospheric
  • Inlet Fittings 1/8'' or 1/4'' Swagelok compression or VCR
  • Outlet Fittings 1/8'' or 1/4'' Swagelok compression or VCR
  • Standard Features Modbus, Web interface(admin)
  • Options 4-20 mA outputs, Dry contact outputs


  • Visit the LDmox product page for more specifications

    Contact us for expert advice on your application.