Self-Contained Sampling System | Low-Cost Gas Sampling

Low-Cost Gas Sampling with Filtration and Flow Control

Features

Universal configuration for atmospheric or line pressure dew-point measurements

Integral particulate filter

Metering valve for flow control

Single block design for faster measurement response

Gas pressure to 1 MPa (10 barg) with a high-pressure option to 21 MPa (210 barg) available

Gas Flow Rate	1 to 5 Nl/min
Operating Pressure	1 MPa (10 barg) with a high pressure option to 21 MPa (210 barg) available
Particulate Filter	99.5% removal of 0.3 microns
Gas Connections	Quick Connect fittings for 6mm O/D plastic tubing or ¼" Swagelok^® tube fittings (PTFE or FEP recommended)
Sample Tube	Supplied with 0.5m pig-tail vent tube, to prevent back-diffusion
Vacuum Rating	Standard push fittings are not vacuum rated
Construction Material	Block and Cap: 316 Stainless Steel Flow Control Block: Aluminium Couplings: Nickel plated Brass
Sensor Port	⅝” UNF to support all Michell Instruments' Impedance Sensors / Transmitters
Environmental	IP66 (NEMA 4)
Operating Temperature	-40 to +60°C (or as determined by sensor specification)
Storage Temperature	-40 to +70°C, 0-95% RH; non-condensing
Weight	1.1kg (1.3kg with sensor installed)

Datasheets Manuals

Easidew Sampler 97165 Datasheet

Self-Contained Sampling System - Michell Easidew Sampler